Set Up The Omniture Connection

About this task

This section describes what you need to do in Bronto and in Omniture to properly setup the Omniture Connection.

You must first enable the Omniture connection within Bronto. This is done via the Options tab on the Omniture Connections page. By checking the Enable Omniture Connection box, you will turn this connection on from the Bronto side.

Procedure

To setup the Omniture Connection in Bronto:

  1. Go to Settings > Integrations > Partner Tools.
  2. Click on the Omniture box.
  3. Click Options.
  4. Check the Enable Omniture Genesis box.
    Make note of the BrontoID. You will need the BrontoID in order to complete the Omniture portion of the connection.
  5. Optional: You may wish to restrict which links we place Omniture tracking data onto. The box at the bottom of the screen allows you to limit the links to which we will add tracking parameters.
    This is useful if you often link to other sites and don't want Omniture tracking parameters added to those links. For example, if your site is http://mysite.com or http://commerce1.mysite.com and you often link to http://partner1.com and http://partner2.com, then you may want to enter mysite.com into this box. This will limit Bronto to adding parameters onto links that contain mysite.com; this will work for both of those first links because they both contain mysite.com. If you also want tracking data added to links to http://myothersite.com, then you should add that in after a comma. (For example, mysite.com, myothersite.com)
  6. Click Save.

What you need to do in Omniture to configure Site Catalyst:

  1. Log into Site Catalyst.
  2. Click the Genesis tab or icon.

    You will see the power of Genesis in the following screen. The options or choices presented to you may differ from those shown here.

  3. Click on the Bronto icon on the list on the left side of your screen and drag the icon to an empty outlined area to the right.
    This will plug the Bronto icon into Site Catalyst and begin the connection process.

    When Bronto has been dropped into the upper left hand outline, dashed lines will appear. The dashed lines indicate that connection has not been accomplished.

    As soon as the Bronto icon is dropped into place, a series of pop ups will appear.


  4. Check the Acceptance box.
  5. Click Next.
  6. Specify the name your system will apply to this Bronto connection.
  7. Enter the email address where you wish to receive confirmations or notices concerning this connection.
  8. Click Next.
  9. Specify your Account ID for this Bronto account.
  10. Click Next.
  11. Use the drop-down box to identify which Site Catalyst eVar will be used for tracking the Bronto Visitor ID.
  12. Check the box confirming that you agree with and understand the statement: "I understand that by enabling "Visitor ID" tracking, this feature may track personally identifiable information of our site visitors. This has privacy implications requiring the implementation of appropriate procedures by my organization, such as providing notice to, and consent of, our site visitors."
  13. Should you wish to participate in the Remarketing Segments program, check the box beside each one you wish to have.
  14. Click Next.
  15. Use the drop-down box to identify and specify which eVar will be used for tracking the E-Mail Message ID.
  16. Click Next.
  17. Check the box for each E-Mail Metric you wish to map to an established Site Catalyst Event.
  18. Use the drop-down box to identify and specify which Site Catalyst Event should be mapped to the chosen E-mail Metric.
  19. Review your connection configuration. Click Save to finish your Bronto Connection process.
    If you successfully completed the connection, you will see the following screen: